Trad Bullet Screw-in arrow point
A graphic explaining the two methods of how arrow length can be measured.
6 Pack: Arrow Configurator – Design Your Custom TRAD Carbon Arrow
From: $119.99 Select options
TRAD Carbon Shaft Set Wooden Decor ID6.2 From: $12.99
TRAD Brass Insert for Carbon Arrows ID6.2 40grn - 100grn $1.99 – $2.49

6 Pack: Arrow Configurator – Design Your Custom TRAD Carbon Arrow

From: $119.99

Do you want your own arrow design but don’t want to get into arrow making just yet? Use our arrow configurator to design your own custom arrow set. We will build it for you according to your selections.

Everything is included:

  • TRAD Wooden Decor Carbon Arrow Shaft – Tough and affordable. Uncut these shafts are 32″ actual shaft length (700 spine 30″) and can be cut to length for you.
  • Installed TRAD Aluminium glue-in insert or OPTIONALLY a heavy brass insert
  • Installed TRAD Nock Push-in ID6.2 in a colour of your choice
  • 1 * Index Feather with a colour of your choice in 4″ shield cut
  • 2 * Hen Feathers with a colour of your choice in 4″ shield cut
  • Helical fletching for better spin, with fletching tape and glue dots to secure the feather ends
  • TRAD screw in arrow bullet point with either 100grn or 125grn weight

Cutting:

We can cut the arrows to your required length on a professional arrow cutter. Please specify this in the required field at the end of the selection process.

Please Note:

  • Sold in lots of 6 only, e.g. 6, 12, 18, etc.
  • Custom arrows can take 5 working days until they are shipped.
  • Leave us a note if you DON’T want us to glue in the inserts, e.g. if you want to line them up for broadheads
  • Price is per set of 6
(12 customer reviews)

1. Select your Arrow Spine × 6

Uncut 500 and 600 spine shafts are 32" length, 700 spine is 30" and all can be cut to your required length by entering it in the field at the bottom of this list.

Clear

2. Select your Nock Colour × 6

Clear

3. Select your Index Feather colour × 6

Clear

4. Select your Hen Feathers colour × 12

Clear

TRAD Alu Insert for Carbon Arrows ID6.2 × 6

These 12grn aluminium inserts are used as standard. You can select a heavier insert optionally below.

5. OPTIONAL Select a Heavy Insert × 6

A standard aluminium insert is included but heavy brass inserts give you a higher FOC and make your arrow more suitable for hunting. A heavy arrow also damages your targets more, so be wise in your choice.

Trad Bullet Screw-in arrow point

6. Select your Arrow Point weight × 6

Clear

Refer to the Arrow Length info image above and let us know A) your required arrow length in INCH or CM and B) if we should measure from NOCK FLOOR or ACTUAL SHAFT LENGTH. If field is empty you will get full length arrows (32″).

15 in stock

Customer Satisfaction Guarantee:

  • “In Stock” items are in our shop in NZ
  • Your order will be shipped within 2-3 working days  (T&Cs apply)
  • Only $12.99 Tracked Courier for non-freight orders (+$5 for rural), NZ wide
  • 14 Day Return Period for all items (T&Cs apply)
  • Minimum 2 Years Warranty on all items (T&Cs apply)
  • Secure payments with Credit Card or Afterpay
Archery Park NZ
store rating4.92 / 5
product rating4.81 / 5
1504 reviews

Arrow Configurator – Design Your Individual TRAD Carbon Arrow

Which shaft for which bow + Weight and Out Diameter details

For bows 20# to 30#: 700 Spine – ID 6.2, 5.53 GPI, OD 7.10

For bows 35# to 40#: 600 Spine – ID 6.2, 6.28 GPI, OD 7.16

For bows 45# to 55#: 500 Spine – ID 6.2, 7.31 GPI, OD 7.30

Straightness: +/-  .003″

Safety Tested

We have tested this shaft rigorously to make sure the carbon fibres are cross woven. This means the inner part of the carbon tube is spun using an endless carbon thread that runs around and upwards and the outer carbon fibres are in a 90degree angle to the inner ones. This makes the arrow a lot tougher as it can resist impact better but it also makes it safer: The most dangerous thing in archery is when an arrow breaks at release. This arrow will usually break clean and straight, which can still cause an injury – but the design provides a good level of protection from thin and sharp carbon splinters lodging under the skin. This is a big and dangerous issue found in most other cheap carbon arrows that have all carbon fibres running in a straight line forward only.

But remember:  Always flex before you shoot to identify any issues!

Additional information

Packaging Dimensions72 × 0.7 × 0.7 cm
Arrow Spine

, , ,

Arrow Shaft Type

Colour

1. Select your Arrow Spine

Arrow Spine

, ,

Arrow Shaft Type

Colour

2. Select your Nock Colour

Colour

, , , , , , ,

3. Select your Index Feather colour

Colour

, , , , , , , ,

4. Select your Hen Feathers colour

Colour

, , , , , , , ,

5. OPTIONAL Select a Heavy Insert

Weight

40grn, 50grn, 100grn

6. Select your Arrow Point weight

Weight

75grn, 100grn, 125grn

How we build arrows

Learn about our process, the tools  we use and the quality that goes into each arrow we build.

12 reviews for 6 Pack: Arrow Configurator – Design Your Custom TRAD Carbon Arrow

1-3 of 12 reviews
  1. Taris
    Verified owner

    Verified reviewVerified review - view originalExternal link

  2. Verified Buyer
    Verified owner

    Verified reviewVerified review - view originalExternal link

  3. Mark
    Verified owner

    Verified reviewVerified review - view originalExternal link

    Look great. Shoot great. Will be getting some more.

Add a review
6 Pack: Arrow Configurator - Design Your Custom TRAD Carbon Arrow 6 Pack: Arrow Configurator - Design Your Custom TRAD Carbon Arrow
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
SKU: arr-shaft-lb-carb-wd-arrowbuild Categories: , , , , Tags: ,

Related products

Customers also bought