6 Pack: Arrow Configurator Gold Tip Traditional – Design Your Custom GT Carbon Arrow
From: $179.99 Select options

6 Pack: Arrow Configurator Gold Tip Traditional – Design Your Custom GT Carbon Arrow

From: $179.99

Do you want your own arrow design but don’t want to get into arrow making just yet? Use our arrow configurator to design your own custom Gold Tip Traditional arrow set. We will build it for you according to your selections.

Everything is included:

  • Gold Tip Traditional Carbon Arrow Shaft – Tough, reliable, heavy – one of the best traditional arrow shafts on the market. Uncut these shafts are 32″ length (600 spine is 30″) and can be cut to length for you for a small extra fee.
  • Installed Gold Tip  Accu-Lite Aluminium glue-in insert or OPTIONALLY a 50grn or 100grn Brass heavy hunting insert
  • Installed Gold Tip GT Nock Push-In ID .246″ in white or OPTIONALLY a different colour
  • 1 * Index Feather with a colour of your choice in 4″ shield cut
  • 2 * Hen Feathers with a colour of your choice in 4″ shield cut
  • Helical fletching for better spin, with fletching tape and glue dots to secure the feather ends
  • Steel screw in arrow point with either 100grn, 125grn, 145grn or 175grn weight

Cutting:

We can cut the arrows to your required length on a professional arrow cutter. Please specify this in the required field at the end of the selection process.

Please Note:

  • Sold in lots of 6 only, e.g. 6, 12, 18, etc.
  • Custom arrows can take 5 working days until they are shipped.
  • Leave us a note if you DON’T want us to glue in the inserts, e.g. if you want to line them up for broadheads
  • Price is per set of 6
(12 customer reviews)

1. Select your Arrow Spine × 6

Uncut these shafts are 32" length (600 spine is 30") and can be cut to your required length by entering it in the field at the bottom of this list.

2. OPTIONAL Change Nock Colour × 6

All Gold Tip Traditional shafts come with a white GT nock included free of charge. If you like a different colour you can select it here for a small extra fee.

3. Select your Index Feather colour × 6

4. Select your Hen Feathers colour × 12

5. OPTIONAL Select a Heavy Insert × 6

A standard aluminium insert (12.1 grn) is included but these 50grn or 100grn brass insert give you a higher FOC and make your arrow very suitable for hunting. A heavy arrow also damages your targets more, so be wise in your choice.

6. Select your Arrow Point weight × 6

Refer to the Arrow Length info image above and let us know A) your required arrow length in INCH or CM and B) if we should measure from NOCK FLOOR or ACTUAL SHAFT LENGTH. If field is empty you will get full length arrows (32″, 30″ for 600 spine).

In stock

Customer Satisfaction Guarantee:

  • “In Stock” items are in our shop in NZ
  • Your order will be shipped within 2-3 working days  (T&Cs apply)
  • Only $12.99 Tracked Courier for non-freight orders (+$5 for rural), NZ wide
  • 14 Day Return Period for all items (T&Cs apply)
  • Minimum 2 Years Warranty on all items (T&Cs apply)
  • Secure payments with Credit Card or Afterpay
Archery Park NZ
store rating4.92 / 5
product rating4.81 / 5
1480 reviews

Gold Tip Arrow Configurator – Design Your Individual GT Carbon Arrow

Which shaft for which bow + Weight and Out Diameter details

For bows 30# to 40#: 600 Spine: 7.8 GPI (grain per inch), 30″ max. length, ID .256″ (6.22mm), OD .295″

For bows 45# to 55#: 500 Spine: 8.6 GPI, 32″ max. length, ID .256″ (6.22mm), OD .300″

For bows 55# to 65#: 400 Spine: 9.3 GPI, 32″ max. length, ID .256″ (6.22mm), OD .302″

Please note: If you order the 100grn brass insert select a higher spine as this increases the dynamic spine of your arrows. E.g. with the 100grn Brass Insert for a 35# select the 500 spine shaft etc.

 

All shafts:

  • Straightness Tolerance: +/- .006″
  • Weight Tolerance: +/- 2 gr

 

Safety Tested

We have tested this shaft rigorously to make sure the carbon fibres are cross woven. This means the inner part of the carbon tube is spun using an endless carbon thread that runs around and upwards and the outer carbon fibres are in a 90degree angle to the inner ones. This makes the arrow a lot tougher as it can resist impact better but it also makes it safer: The most dangerous thing in archery is when an arrow breaks at release. This arrow will usually break clean and straight, which can still cause an injury – but the design provides a good level of protection from thin and sharp carbon splinters lodging under the skin. This is a big and dangerous issue found in most other cheap carbon arrows that have all carbon fibres running in a straight line forward only.

But remember:  Always flex before you shoot to identify any issues!

Additional information

Packaging Dimensions72 × 0.7 × 0.7 cm
Arrow Spine

, , ,

Arrow Shaft Type

Colour

1. Select your Arrow Spine

Arrow Spine

, , ,

2. OPTIONAL Change Nock Colour

Colour

, , , ,

3. Select your Index Feather colour

Colour

, , , , , , , ,

4. Select your Hen Feathers colour

Colour

, , , , , , , ,

5. OPTIONAL Select a Heavy Insert

Weight

50grn, 100grn

6. Select your Arrow Point weight

Weight

100grn, 125grn, 150grn, 175grn

How we build arrows

Learn about our process, the tools  we use and the quality that goes into each arrow we build.

12 reviews for 6 Pack: Arrow Configurator Gold Tip Traditional – Design Your Custom GT Carbon Arrow

Customer Images

Image #1 from Wayne
Image #2 from Ronald
Image #1 from Wayne

Wayne

They perform well and they look nice too!

Image #2 from Ronald

Ronald

They rock! Solid arrows, I love them

Image #1 from Wayne
Image #2 from Ronald
1-3 of 12 reviews
  1. Verified reviewVerified review - view originalExternal link

  2. Verified reviewVerified review - view originalExternal link

  3. Verified reviewVerified review - view originalExternal link

    Very good quality arrows, very accurate

Add a review
6 Pack: Arrow Configurator Gold Tip Traditional - Design Your Custom GT Carbon Arrow 6 Pack: Arrow Configurator Gold Tip Traditional - Design Your Custom GT Carbon Arrow
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required